C-TEC Quantec Interface unit c/w Remote Socket
Quiescent current: 1mA
Alarm current: 1mA
Connections: N-; N+; L+; SW. Wired as a slave to a QT602 call point, QT609 call point or QT630 dementia ...
- Quiescent current: 1mA
- Alarm current: 1mA
- Connections: N-; N+; L+; SW. Wired as a slave to a QT602 call point, QT609 call point or QT630 dementia care controller
- Onboard 6.35mm Remote Jack Socket: Yes, can be configured to accept a n/o or n/c jack plug
- Product dimensions (mm): 87 x 87 x 33. Can be mounted on a standard UK 25mm single gang flush or surface back box
- Construction & finish: Plastic
- IP Rating: IP20
- Weight: 68g
- Operating conditions/temperature: -5 to 40ºC
In stock
SKU
QT636
Product Details
- Allows any device with a normally open or normally closed 6.35mm (1/4 inch) jack plug to be connected to Quantec.
- Particularly suited for use with our NC805MD Portable Movement Detector (n/o operation), QT644 Floor Pressure mat (n/o operation), QT633 Bed Exit mat (n/c operation) or QT634 Chair Exit Mat (n/c operation).
- Must be wired as a slave to a QT602 or QT609 range addressable call point or QT630 dementia care controller.
- When the device connected to the QT636 is operated a call will be generated on the Quantec call system as programmed.
- Mounts on a standard UK 25mm single gang back box.
| Brands | C-Tec |
|---|---|
| Connections | N-; N+; L+; SW. Wired as a slave to a QT602 call point, QT609 call point or QT630 dementia care controller |
| Quiescent Current | 1mA |
| IP Rating | IP20 |
| Dimensions | 87 x 87 x 33 mm. Can be mounted on a standard UK 25 mm single gang flush or surface back box |
| Constructions | Plastic |
| Operating Temperature | -5 to 40°C |
Write Your Own Review
Specifications
